VTV Valve : Ball Valve
- Floating Ball Valves
In this type of valve, the ball has some freedom to move along the axis of the valve while being prevented from rotating againts the stem. When line pressure is applied to the closed ball, it moves slightly (or floats) downstream to maintain contact with the downstream seat where primary sealing occurs. This design is restricted in its use by size and service pressure as the torque required to operate the valve will increase dramatically in accordance with these two factors. - Trunnion Mounted Ball Valves
The ball is held in a fixed axial position by upper and lower stems (Trunnion) and can move only in rotational mode. The seats are contained in metal carriers which are spring loaded againts the ball. The line pressure applied to a closed valve increases the load on the upstream seat to effect a tight seal. Therefore, the primary sealing is on upstream seat. Independent floating seats are spring loaded to permit draining of the body cavity effectively providing a "Double Block and Bleed" function.
- Model : BV-101 [One Piece Body Ball Valve Reduced Port]
Connection : Screw BSP, NPT
Specification
- For Chemical and industrial application
- Blow-out proof stem design
- 100% air tested under water at 80-100 psi
- Working pressure : 1000 PSI
- Temperature range : - 50 C to 220 C
Option
- Locking Device
- Oval Handle
- Butterfly Handle
Pressure/Temperature Graph
Dimensions (mm)
SizeBHDLSKW (kg)1/4"53862.53917190.073/8"740734421210.111/2"9.2518556.52527.50.183/4"12.553875932300.261"16.0561077138360.421 1/4"20611077849400.751 1/2"2568130835342.50.852"327313010065511.35
Material List - Model : BV-201 [Two Piece Body Ball Valve Full Port]
Connection : Flange JIS 10 K
Main Parameter Specification :
- Face to Face : JIS B2002
- End Flange Dimensions : JIS B2212
- Working Pressure : 10K
- Pressure Test : JIS B2003
- Actuator Mounting Pad : ISO 5211 (Consult with manufacture for application first)
Option
- PEEK
- 15% Glass PTFE
- 25% Carbon Full PTF
- TFM 1600
- With Mounting Pad
Material List
Dimensions (mm) - Model : BV-202 [Two Piece Body Ball Valve Full Port]
Connection : ANSI 150, 300
Specification
Valve Design : MSS-SP-72
Face to face : ASTM/ANSI B16.10
Flange Connection : ANSI B16.1
Pressure test : API 598 (ISO 5208)
Suitable for
- Water
- Oil
- Gasses
Features
- Anti Static Device
- Fire Safe Device
Option
- PEEK
- 15% Glass PTFE
- 25% Carbon Full PTF
- TFM 1600
Material List
Dimensions (mm) - Model : BV-203 [Two Piece Body Ball Valve Full Port]
Connection : PN16,PN40
Suitable for :
- Water
- Oil
- Gases
Features
- DIN PN16-40
- Full Port
- Investment Casting
- Blow-out proof Stem
- Locking Device Handle (option)
- PED97/23/PE (CE0035) Approved
- Anti Static Device (option)
- Design : DIN3357, EN12516
- End Flange : DIN2501,PN10-40
- Face to Face : DIN3202-F4
- Inspection Testing : DIN3230/3, EN12266
Option
- PEEK
- 15% Glass PTFE
- 25% Carbon Full PTF
- TFM 1600
Material List
Dimensions (mm) - Model : BV-301 [Three Piece Body Ball Valve Full Port]
Connection : Butt Weld, Socket Weld, Screw BSP|NPT
Suitable for :
- Water
- Oil
- Gasses
Features
- 1000 PSI/ PN 63
- Full Port
- Investment Casting
- Blow-out proof Stem
- Locking Device Handle (option)
- PED97/23/PE (CE0035) Approved
- Anti-Static device (option)
- Thread : ASME B1.20.1, BS21.DIN2999/259, ISO228-1, JIS B 0203, ISO7/1
- Inspection Testing : API598, EN12266
Temperature/Pressure Graph
Material List
Dimensions (mm)
- Model : BV-301M [Three Piece Body Ball Valve Full Port]
Connection : Butt Weld, Socket Weld, Screw NPT
Suitable for :
- Water
- Oil
- Gases
Specification
- Body & Ends caps quality investment casting
- With ISO 5211 direct mounting pad
- Adjustable stem packing
- Available in stainless steel or carbon steel
- Blow-out proof stem design
- Working pressure : 1000/800 psi
- Temperature range -20 F to 450 F
- With locking function
Material List
Dimensions (mm)
Break-Torque Value (Nm/at 0 psi)
Note 1: The greases use including lubricant & anti-size grease are both SILICONE-FREE.
Note 2 : Strongly suggest increasing at least 30% - 40% for safety factor for mounting actuator - Model : BV-302 [Three Piece Body Ball Valve Full Port]
Connection : Butt Weld, Socket Weld, Screw BSP|NPT
Specification
- Body and end caps quality investment casting
- Full bore design
- With ISO 5211 direct mounting pad
- Adjustable stem packing
- Available in stainless steel or carbon steel
- Blow-out proof stem design
- 100% air tested under water at 80-100 psi
- Working pressure :
TFM seat : 1/4"~2", 2250 psi
DERLIN/ PEEK seat : 2-1/2"~3", 2250 psi
- Temperature range : see Pressure/Temperature Table
- With Locking Function
Suitable for
- Water
- Oil
- Gases
Option
- Fire safe design (with SS housing)
- Spring handle (dead man handle)
- Steam Jacket
- V-ball for control valve (ball valve type)
- Cryogenic type
- PTFE/PFA coating (40-70 um)
- Hastalloy C/ Super duplex/Alloy 20/Monel
Material List
Dimensions (mm)
Pressure/Temperature
Break-Torque Value (Nm/at 200 psi)
ITEM | PART NAME | MATERIALS |
1 | INSERT | CF8M |
2 | BODY | CF8M |
3 | SEAT | PTFE |
4 | BALL | SS 316 |
5 | STEM | SS 316 |
6 | THRUST WASHER | PTFE |
7 | STEM PACKING | PTFE |
8 | GLAND WASHER | SS 304 |
9 | HANDLE | SS 304 |
10 | WASHER | SS 304 |
11 | NUT STOPPER | 22 304 |
12 | SLEEVE | PLASTIC |
Does Titanium's tarnish shine? - TITI A.D.
ReplyDeleteTitanium's 2016 ford focus titanium is an alloy made titanium dental with copper, which is similar to gold. It is often titanium wok used titanium white rocket league as a substitute for gold for diamonds, hearts, and diamonds. ray ban titanium