Bushing : Hi-Tech Bush


                                                                
Hi-Tech Bush is specially formulated with Japanese Technology and knowhow. It is made of a combination of 3 fibres (Composite fibres), which contribute to the Strength, Wear Resistance & Impact Cushion. High Quality grease ingredient is embedded to make our HI-TECH BUSH self lubricant. Its excellent wear resistance, stability and durability in water, steam and oily environment has made HI-TECH BUSH a very good material for application in various industries.

Failure of Bush
Features
  • Good Heat Resistance
  • Good Wear Resistance
  • Good Chemical Resistance
  • Shock Load Absoption
  • No Damage to Mating Part
  • Cost Effective
  • Self Lubricating
  • Theft Resistance
  • Weight Reduction
  • Tolerant of Misalighment
Physical and Mechanical Properties

Property Units Results Test Method/Standard
Maximum Compressive Load kgf >9500* Pressing by Shaft 45 mm Dia. 100 mm L
Compressive Modulus kgf/cm2 35.800 ISO 604
Ultimate Tensile Strength kgf/cm2 360 ISO 527-4
Tensile Modulus kgf/cm2 105.300 ISO 527-4
Interlaminar Shear Strength kgf/cm2 97,4 ASTM D 2344
Abrasion Resistance Weight Loss mg 470 ASTM D 4060
Flexural Modulus Kgf/cm2 82.200 ISO 178
Izod Impact Strength (Notched) KJ/m2 8 ASTM D 256
Rockwell Hardness M Scale 100 ISO 2039-2
Coefficient of Linear Thermal Expansion x10^-5/C 1.8 ASTM D 696
Max Working Temperature C 180 ASTM D 696

Noted :
* The maximum load cell available is 10,000 kgf

HI-TECH BUSH is complied with the requirements of Malaysian Food Act 1983 (Act 281) and Regulation Thirteenth Schedule (Regulation 28) all amendment up to 20th February 2008

Typical Applications
                                     
  • Bogie Wheel Axial Block
  • Hanger Bearing for CBC, Fruit, Fiber, Nut, Kernel & Shell Conveyor
  • Square Front Block
  • Digestor Bottom Guidance Bush
  • Aerator Guidance Bush
  • Screw Press Lengthening Shaft Bush
Standard Size Available
Tube :
Min I/D : 35 mm
Max O/D : 160 mm
Max Length : 250 mm

Rod :
Min I/D : Solid
Max O/D : 90 mm
Max Length : 250 mm





Comments

Post a Comment

Popular posts from this blog

PALM OIL CONVEYOR CHAIN : TRP

Image
BRITISH STANDARD CONVEYOR CHAIN SOLID PIN CHAIN TRP Chain No Breaking Load Pitch Roller Diameter Inner Width Pin Diameter Plate Thickness Plate Height lbf P R W D T1 T2 H TRP SM220040 44000 101,6 47,6 19 19 5 5 38,1 TRO SM400060 81000 152,4 66,7 25,4 27 8 8 50,8 TRP SM600060 85000 152,4 66,7 25,4 27 9 8 50,8 SOLID EXTENDED PIN CHAIN TRP Chain No Breaking Load Pitch Roller Diameter Inner Width Pin Diameter Plate Thickness Extended Pin Length Thread Size Plate Height lbf P R W D T1 T2 A B H TRP SM220040 EP4/EP6 44000 101,6 47,6 19 19 5 5 36 M16 38,1 TRP SM380060 EP4 55000 152,4 66,7 25,4 27 7 5 45...
Read more

PALM OIL MILL CONVEYOR CHAIN : OCM

Image
HOLLOW PIN CHAIN OCM Chain No. Average Tensile Strength Pitch Roller Dia. Inner Width Hollow Pin Bore Dia. Pin Dia. Inner Plate Thickness Outer Plate Thickness Plate Height Pin Length Weight per Meter lbf P R W d D T1 T2 H LS LH kg HC120040 MX SUPER 22000 101,6 47,6 19,1 13,2 19,05 6,3 5,1 38,1 50,5 51,8 5,9 HC240060 MX SUPER 50000 152,4 66,7 25,4 19,56 26,92 7,8 6,5 50,8 63 63,8 10,5 SOLID PIN CHAIN OCM Chain No. Average Tensile Strength Pitch Roller Dia. Inner Width Pin Dia. Inner Plate Thickness Outer Plate Thickness Plate Height Pin Length T Pin Type Bolt Type Weight per Meter lbf P R W ...
Read more